Did you perform the Lighting Systems Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Turn ON the ignition.
2. Turn On the appropriate turn signal.
3. Disconnect the cornering lamp bulb.
4. Connect a test lamp between the cornering lamp feed circuit and the cornering lamp ground circuit.

Did the test lamp illuminate?

Go to Step 3

Go to Step 5

Inspect for poor connections at the cornering lamp connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 7

Go to Step 4

Replace the cornering lamp bulb. Refer to Cornering Lamp Bulb Replacement .

Did you complete the replacement?

Go to Step 7

--

Test the cornering lamp feed circuit for high resistance or open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 7

Go to Step 6

Repair the open in the cornering lamp ground circuit . Refer to Wiring Repairs in Wiring Systems

Did you complete the repair?

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2