Removal Procedure
Notice: When installing the brake pedal switches it is very important that the
brake pedal remain in the full up or at rest position or damage to the brake
system and/or switch misadjustment may occur.
- Remove the instrument
panel sound insulator as needed.
- Remove the IP sound insulators, as needed.
- Twist the lower switch (4) counter-clockwise and remove.
- Disconnect the lower switch electrical connectors.
Installation Procedure
- Connect the lower switch
electrical connectors.
- Install the lower switch into the lower retainer.
- Slide the lower switch into the retainer until the switch plunger
is fully depressed into the switch barrel.
- Twist the switch (4) clockwise until travel has stopped
and it fully locks into position.
- Install sound insulator.