GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Important: 

       • The night vision camera is not serviceable and must be sent to an authorized service center only.
       • If the night vision camera is removed or adjusted for any reason, it must be aimed. Refer to Night Vision Camera Aiming .

  1. Open and support the hood.

  2. Object Number: 456008  Size: SH
  3. Disconnect the night vision camera electrical connector.
  4. Important: Release retainers from the back side.


    Object Number: 547670  Size: SH
  5. Turn the three camera retainers (1) 90 degrees and remove the camera from the mounting bracket.
  6. Remove the camera assembly.

Installation Procedure

    Important: Make sure the retainers are fully turned and in the locked position.


    Object Number: 547670  Size: SH
  1. Install the night vision camera to the mounting bracket and turn the retainers (1) 90 degrees from the back side..

  2. Object Number: 456008  Size: SH
  3. Connect the electrical connector.
  4. Perform aiming procedure for night vision camera. Refer to Night Vision Camera Aiming .