Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform A Diagnostic System Check - Power Door Systems? | -- | ||
2 |
Does the Mirror Fold Switch parameter display In or Out after momentarily pressing the Fold switch, and then Idle as expected? | -- | ||
3 |
Does the scan tool display Fold In and Fold Out as expected? | -- | ||
4 | Test the motor control circuits of the inoperative mirror for an open, or a short to ground. Did you find and correct the condition? | -- | ||
5 | Test the motor control circuits of the inoperative mirror for a short to battery voltage. Did you find and correct the condition? | -- | ||
6 | Inspect for poor connections at the harness connector of the inoperative power mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
7 | Replace the inoperative power mirror. Refer to Power Mirror Replacement . Did you complete the repair? | -- | -- | |
8 | Inspect for poor connections at the harness connector of the door module associated with the inoperative mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
9 | Replace the door module associated with the inoperative mirror. Refer to Door Control Module Replacement . Did you complete the repair? | -- | -- | |
10 | Inspect for poor connections at the harness connector of the driver door switch assembly. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
11 | Replace the driver door switch assembly. Refer to Front Door Switch Replacement . Did you complete the repair? | -- | -- | |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
