GM Service Manual Online
For 1990-2009 cars only

Instrument Panel Integration Module (IPM)

Module Information-- PROM ID: The scan tool displays the module PROM ID.

Module Information-- Calibration ID: The scan tool displays the calibration or program revision level used in the PROM.

Module Information-- Julian Date of Build: The scan tool displays the module date of build in total calendar days.

Module Information -- Year Module Built: The scan tool displays the module year built.

Module Information -- 8 Digit GM Part Number: The scan tool displays the module GM part number.

Module Information -- Component Serial Number: The scan tool displays the module serial number.

Non-HVAC Data--Trunk Release Switch: The scan tool displays the switch state.

Non-HVAC Data--Fuel Door Release Sw.: The scan tool displays the switch state.

Rear Integration Module (RIM)

Module Information 1 -- PROM ID: The scan tool displays the module PROM ID.

Module Information 1 -- Calibration ID: The scan tool displays the calibration or program revision level used in the PROM.

Module Information 1 -- Julian Date of Build: The scan tool displays the module date of build in total calendar days.

Module Information 1 -- Year Module Built: The scan tool displays the module year built.

Module Information 2 -- 8 Digit GM Part Number: The scan tool displays the module GM part number.

Module Information 2 --Component Serial Number 8-11: The scan tool displays the first partition of the serial number.

Module Information 2 --Component Serial Number 12: The scan tool displays the second partition of the serial number.

Module Information 2 --Component Serial Number 13-16: The scan tool displays the third partition of the serial number.

Module Information 2 --Component Serial Number 17-18: The scan tool displays the last partition of the serial number.

Data Display--Data--Battery Voltage: The scan tool displays the battery voltage level at the module.

Data Display--Outputs--Trunk Release Output: The scan tool displays the module output command state.

Data Display--Outputs--Fuel Door Release Relay: The scan tool displays the relay state.