SERVICE MANUAL UPDATE-SEC. 5 BRAKE ROTOR SPECIFICATIONS

SUBJECT: SERVICE INFORMATION MANUAL UPDATE - BRAKE ROTOR SPECIFICATIONS ON 1992-1993 ELDORADOS, SEVILLES, AND ALLANTES

This bulletin is an update to Section 5, Brake Rotor Specification for the E, K, and V series. The corrections listed below are for 1992-1993 Service Information Manuals. Please mark these corrections in you manuals.

1992-1993 All E, K, and V

Front Rotor:

0 Rotor thickness (new) should be 32.20mm (1.268"). 0 Minimum rotor thickness after refinish should be 31.08mm (1.224").

Rear Rotor:

0 Minimum rotor thickness after refinish should be 9.88mm (.389").

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.