Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Is the voltage within the specified range? | 10-15V | Go to Step 3 | Go to Step 8 |
3 | Measure resistance from LH cornering lamp terminal G to ground. Is the resistance within the specified range? | 0-5 ohms | Go to Step 4 | Go to Step 11 |
4 | Connect a fused jumper from C202 terminal A16 to power. Does the LH cornering lamp illuminate? | -- | Go to Step 5 | Go to Step 10 |
5 | Measure resistance from RH cornering lamp terminal G to ground. Is the resistance within the specified range? | 0-5 ohms | Go to Step 6 | Go to Step 12 |
6 | Connect a fused jumper from C202 terminal A15 to power. Does the RH cornering lamp illuminate? | -- | Go to Step 7 | Go to Step 9 |
7 | Replace the turn/hazard switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt. Is the turn/hazard switch replacement complete? | -- | Go to Step 13 | -- |
8 | Repair the open in CKT 241 (BRN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
9 | Repair open in circuit 58 (ORN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
10 | Repair open in circuit 57(ORN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
11 | Repair open in circuit 750 (BLK) between LH cornering lamp terminal G and G101. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
12 | Repair open in circuit 750 (BLK) between RH cornering lamp terminal G and G101. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK. | Go to Step 2 |
