GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Eldorado 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Lock Actuator Replacement

Removal Procedure

    Object Number: 367576 Size: SH
  1. Remove the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement in order to access the lock actuator.
  2. Disconnect the electrical connectors.
  3. Disconnect the lock release cable from the key cylinder.
  4. Remove the bolts (3).
  5. Remove the lock actuator (4).

Installation Procedure

    Object Number: 367576 Size: SH
  1. Install the lock actuator (4) to the latch.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts (3).

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  3. Connect the lock release cable to the key cylinder.
  4. Connect the electrical connectors.
  5. Secure the rear compartment lid trim panel.
  6. Close the rear compartment lid.