SMU - Revised Engine Frame to Vehicle Mounting Insulator Bolt Torque
| Subject: | Revised Engine Frame to Vehicle Mounting Insulator Bolt Torque Specification |
| Models: | 1998-2001 Cadillac Eldorado |
This bulletin is being issued to revise the engine frame to vehicle mounting insulator bolt torque specification in the Frame & Underbody sub-section of the 1998-2001 Service Manuals.
The following information has been updated within SI2000. If you are using a paper version of these Service Manuals, please mark a reference to this bulletin on the affected pages.
Refer to the following table for revision information:
Service Manual | Sub-Section | Title - Procedure | Revise Text to Read |
|---|---|---|---|
1998-01 | Frame & Underbody | Fastener Tightening Specifications | Frame Insulator Bolt to Body - 98 N·m (72 lb ft) |
1998 | Frame & Underbody | Engine Frame - Installation Procedure | Tighten Tighten the bolts/fasteners to 98 N·m (72 lb ft) |
1999 | Frame & Underbody | Frame Removal - Installation Procedure | Tighten Tighten the bolts/fasteners to 98 N·m (72 lb ft) |
2000-01 | Frame & Underbody | Frame Replacement - Installation Procedure | Tighten Tighten the bolts/fasteners to 98 N·m (72 lb ft) |
2000-01 | Frame & Underbody | Frame Cushion/Insulator Replacement - Installation Procedure | Tighten Tighten the insulator bolts to 98 N·m (72 lb ft) |
2001 | Engine Mechanical - 4.6L | Fastener Tightening Specifications | Frame Mounting Bolts - 98 N·m 72 lb ft) |
1999 and 2001 | Engine Mechanical - 4.6L | Engine Replacement - Installation Procedure | Tighten Tighten the bolts/fasteners to 98 N·m (72 lb ft) |
