Tools Required

J 38185 Hose Clamp Pliers

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Remove the front air deflector shield . Refer to Front Air Deflector Replacement in Body Front End.
3. Drain the coolant. Refer to Cooling System Draining and Filling .
4. Lower the vehicle.
5. Using J 38185 slide the hose clamp down the hose to remove the hose.



6. Remove the radiator inlet hose (1) from the radiator.
7. Using J 38185 slide the hose clamp down the hose to remove the hose.
8. Remove the radiator inlet hose (1) from the engine.

1. Install the radiator inlet hose (1) to the engine.
2. Install the radiator inlet hose (1) to the radiator.
3. Using J 38185 slide the hose clamps into their original position on the hose.
4. Install the front air deflector shield . Refer to Front Air Deflector Replacement in Body Front End.
5. Refill the cooling system. Refer to Cooling System Draining and Filling .
6. Connect the negative battery cable.