Removal Procedure
- Remove the lower air deflector. Refer to
Front Air Deflector Replacement
in Body Front End.
- Drain the washer solvent
container into a suitable container.
- Disconnect the washer hose (2) from the washer pump (5).
- Disconnect the electrical connector (7) from the washer
pump.
- Gently pry the washer pump from the container.
- Remove the washer pump (5) from the washer solvent container.
- Remove the washer pump grommet from the washer solvent container.
Installation Procedure
- Install the new washer
pump grommet into the washer solvent container.
- Lubricate the washer pump intake nozzle with clean water to aid
in the installation of the washer pump (5) into the washer container.
- Install the washer pump in the washer solvent container by snapping
into place.
- Ensure the washer pump is secure to the washer solvent container.
- Connect the electrical connector (7) to the washer pump.
- Connect the washer hose (2) to the washer pump.
- Install the lower air deflector. Refer to
Front Air Deflector Replacement
in Body Front End.
- Open the hood.
- Fill the washer solvent container.
- Close the hood.
- Inspect the wiper washer system operation.