Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting Systems Diagnostic System Check? | Go to Step 2 | |
2 | Do the park lamps operate properly? | Go to Step 3 | Go to Park Lamps Inoperative |
3 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 4 |
4 |
Does the test lamp illuminate? | Go to Step 5 | Go to Step 8 |
5 | Connect a test lamp between the park lamp supply voltage circuit of the underhood lamp assembly and the ground circuit of the underhood lamp assembly. Does the test lamp illuminate? | Go to Step 6 | Go to Step 9 |
6 | Inspect for poor connections at the harness connector of the underhood lamp assembly. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 10 |
7 | Inspect for poor connections at the underhood lamp bulb. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 12 | Go to Step 11 |
8 | Repair an open or high resistance in the park lamp supply voltage circuit of the underhood lamp assembly. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 12 | -- |
9 | Repair an open or high resistance in the ground circuit of the underhood lamp assembly. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 12 | -- |
10 | Replace the underhood lamp assembly. Refer to Underhood Lamp Replacement . Is the underhood lamp replacement complete? | Go to Step 12 | -- |
11 | Replace the underhood lamp bulb. Did you complete the replacement? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
