SMU - Revised Wiper Arm Replacement - Rear Torque Specification

This bulletin is being issued to revise the Wiper Arm Replacement-Rear Torque Specification in the Wipers/Washer System sub-section of the 2004 Service Manual.

Within SI, document #1205661 has been updated with the following information. If you are using a paper version of this Service Manual, please replace the current information with the following information and make a reference to this bulletin on the affected page.

- Revise the text of the Wiper Arm Replacement-Rear Torque Specification in Step 3 to read as follows:

Tighten
Tighten the nut to 17N·m (13 lb ft).