GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Tilt Actuator Assembly Replacement - On Vehicle

Removal Procedure

    Object Number: 295140 Size: SH
  1. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel Gauges and Console.
  2. Remove the bolt securing the tilt actuator assembly.

    3. Object Number: 295138 Size: SH
  3. Remove four fasteners securing the tilt actuator assembly to the steering column.
  4. Disconnect the electrical connection.
  5. Remove the tilt actuator assembly.

Installation Procedure

    Object Number: 295138 Size: SH
  1. Connect the tilt actuator assembly electrical connection and install.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install four bolts securing the tilt actuator assembly.

    3. Tighten
    Tighten the tilt actuator assembly bolts to 9 N·m (80 lb in).


    Object Number: 295140 Size: SH
  3. Install the bolt securing the tilt actuator assembly to the tilt head.

    4. Tighten
    Tighten the tilt actuator assembly bolt to 9 N·m (80 lb in).

  4. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel Guages and Console.