GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 105567  Size: SH
  1. Remove the left (1) and right console side panels.
  2. Disconnect the console harness connector.
  3. Disconnect the rear blower motor assembly electrical connectors.
  4. Disconnect the air duct from the rear blower motor.

  5. Object Number: 130703  Size: SH
  6. Remove the rear blower motor retaining bracket nuts.
  7. Remove the bolts retaining the rear blower bracket to the IP.
  8. Remove the rear blower motor retaining bracket studs.
  9. Remove the rear blower motor insulator from under the rear blower motor assembly.
  10. Push the rear blower motor assembly down.
  11. Push the rear blower motor assembly forward to disengage the rear air duct.
  12. Remove the rear blower motor assembly out the passenger side of console.

Installation Procedure


    Object Number: 130703  Size: SH
  1. Install the rear blower to its original position.
  2. Engage the rear air duct.
  3. Install the rear blower motor insulator under the rear blower motor assembly.
  4. Install the rear blower motor retaining bracket studs.
  5. Install the bolts retaining the rear blower bracket to the IP.
  6. Install the rear blower motor retaining bracket nuts.

  7. Object Number: 105567  Size: SH
  8. Connect the air duct to the rear blower motor.
  9. Connect the rear blower motor assembly electrical connectors.
  10. Connect the console harness electrical connector.
  11. Remove the left (1) and right console side panels.