Removal Procedure
- Grasp the top edge of the left console trim
panel (2).
A flat bladed tool may be needed to grasp the top edge of the trim panel.
- Pull out on the console trim panel (2) in order to disengage the
retainers.
- Pull rearward on the console trim panel (2) in order to disengage
the console trim panel front attachment (1).
- Remove the left console trim panel (2).
Installation Procedure
Caution: Ensure that the front hook of the console trim panel is hooked to
the HVAC cover. Failure to engage the hook could result in personal injury or vehicle
damage caused by panel interference with the accelerator pedal.
- Engage the left console trim panel (2)
front attachment (1) by engaging the trim panel front attachment (1)
to the peg (1) on the rear blower motor housing.
- Align the console trim panel retainers to the
console .
- Push firmly on the trim panel (2) in order to engage the rear
retainers.