The Drivers Information Center (DIC) display is integration into the Instrument Cluster (IPC). The power feed for the display is 54 volt comes from the Instrument Panel Integration Module (IPM) using circuit 1369 (YEL).

DSPL Mode Switch

The DSPL Mode switch, when pressed , grounds circuit 893 (PNK) thus indicating to the IPC to activate or deactivate the reflective speed display.

English/Metric Switch

The English/Metric switch, when pushed, grounds circuit 881 (LT BLU) thus indicating to the IPC to switch the displays unit of measure.

Trip A/B Switch

The Trip A/B switch, when pushed, grounds circuit 894 (DK BLU) thus indicating to the IPC to switch the trip displays.

Trip Reset Switch

The Trip Reset switch, when pushed, grounds circuit 376 (LT GRN) thus indicating to the IPC to reset the selected trip odometer.

On/Off Switch

The On/Off switch, when pushed, grounds circuit 1358 (DK GRN/WHT) thus indicating to the IPC to turn on or off the DIC display and is also the On/Off switch is used in the personalization mode.

Info Reset Switch

The Info Reset switch, when pushed, grounds circuit 1816 (ORN) thus indicating to the IPC to reset the selected information.

Info Down Switch

The Info Down switch, when pushed, grounds circuit 929 (PNK/BLK) thus indicating to the IPC to cycle down through the DIC information.

Info Up Switch

The Info Down switch, when pushed, grounds circuit 926 (BRN/BLK) thus indicating to the IPC to cycle Up through the DIC information.

LH Driver Information Switch Ground

LH Driver Information Switch is ground by circuit 351 (BLK/WHT)

RH Driver Information Switch Ground

RH Driver Information Switch is ground by circuit 451 (BLK/WHT)