Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Navigation System Check performed? | -- | Go to Navigation System Check | |
2 |
Is the voltage measured within the specified range? | 0 V | ||
3 | Measure the voltage between cavity 6 of the Navigation Data Processor harness connector C2 and ground with a DMM. Is the voltage measured within the specified range? | 0 V | ||
4 | Repair the short to B+ in circuit 2061 between cavity 19 of the Navigation Data Processor connector C2 and cavity 7 of the Radio connector C2. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
5 | Measure the resistance between cavity 19 of the Navigation Data Processor harness connector C2 and ground with a DMM. Is the resistance measured within the specified range? | Infinite | ||
6 | Repair the short to B+ in circuit 2062 between cavity 6 of the Navigation Data Processor connector C2 and cavity 8 of the Radio connector C2. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
7 | Measure the resistance between cavity 6 of the Navigation Data Processor harness connector C2 and ground with a DMM. Is the resistance measured within the specified range? | Infinite | ||
8 | Repair the short to ground in circuit 2061 between cavity 19 of the Navigation Data Processor connector C2 and cavity 7 of the Radio connector C2. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
9 |
Is the resistance measured within the specified range? | 0-2 ohms | ||
10 | Repair the short to ground in circuit 2062 between cavity 6 of the Navigation Data Processor connector C2 and cavity 8 of the Radio connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
11 | Measure the resistance between cavity 6 of the Navigation Data Processor harness connector C2 and cavity 8 of the Radio harness connector C2 with a DMM. Is the resistance measured within the specified range? | 0-2 ohms | ||
12 | Repair the open in circuit 2061 between cavity 19 of the Navigation Data Processor connector C2 and cavity 7 of the Radio connector C2. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
13 | Replace the Navigation Data Processor. Refer to Navigation Data Processor Replacement in Body Rear End. Is the replacement complete? | -- | Go to Navigation System Check | -- |
14 | Repair the open in circuit 2062 between cavity 6 of the Navigation Data Processor connector C2 and cavity 8 of the Radio connector C2. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
