Removal Procedure
- Remove rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Disconnect wiring from GPS antenna module harness.
- Remove pushpins retaining GPS antenna module to the underside
of the rear shelf trim panel by pushing in on center of pushpin and then pulling
out the entire pushpin assembly.
- Remove the five wire retaining clips for the
antenna module wiring harness.
- Remove the GPS antenna module assembly from the rear shelf trim
panel.
Installation Procedure
- Install the GPS antenna module to the rear shelf trim panel.
- Reset the pushpins by pushing the center of the pushpin out.
- Install the pushpins through the antenna module into the rear
shelf trim panel.
- Install the wiring harness retainers to the rear
shelf trim panel.
- Install rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.
- Connect the antenna module wiring harness.