GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville 🢒 Body and Accessories 🢒 Stationary Windows 🢒 Windshield Side Reveal Molding Replacement

Removal Procedure

    Object Number: 105240 Size: SH
  1. Open the door.
  2. Starting at the bottom of the reveal molding (1), pull the molding off of the hinge pillar flange.
  3. Disengage the tab at the top of the molding by sliding it out of the upper reveal molding.
  4. Remove the side reveal molding.

Installation Procedure

    Object Number: 105240 Size: SH
  1. Install the tab at the top of the side reveal molding (1) into the end of the upper reveal molding.
  2. Align the side reveal molding retainer clips to the hinge pillar flange.

    3. Important: The reveal molding must overlap the flexible flap on the air inlet grille panel.

  3. Press down on the side reveal molding in order to engage the retainer clips at the windshield pillar flange in order to secure.
  4. Close the door.