For 1990-2009 cars only
Removal Procedure
- Start at the joint at bottom of door opening and pull the weatherstrip away from the door opening flange.
- Work around the door opening and remove the weatherstrip.
Installation Procedure
- Position the paint dot in the upper corner of the center pillar.
- Working downward along the front edge, install the weatherstrip on the door opening flange.
- From the center pillar corner working rearward, install the weatherstrip along the roof rail and the lock-pillar flange.
- With the palm of your hand ensure that the weatherstrip is seated on the entire door opening flange.
- Using a plastic trim stick or equivalent, position the close-out lip over the interior trim around the entire door opening, or use pull-string under closeout lip to reposition the lip.
Important: One paint dot on the weatherstrip indicates RH weatherstrip starting point, and two paint dots on the weatherstrip indicates LH weatherstrip starting point.
