For 1990-2009 cars only
Removal Procedure
- Insert a flat bladed tool under the rear edge of the mirror and window switch pack.
- Push the tool firmly towards the switch plate to disengage the retention clip.
- Lift up on the rear of the switch pack and remove it from the door trim panel.
- Disconnect the electrical connectors.
- Remove the switch pack.
Important: Before lifting the switch plate from the door trim panel, ensure that the flat bladed tool has fully disengaged the retainer clip. Otherwise damage to the switch plate or the retainer clip may occur.
Installation Procedure
- Connect the electrical connectors.
- Install the switch plate into the door trim panel.
- Press down on the switch plate evenly to engage the retainer clips.
