For 1990-2009 cars only
Securing Loose Moldings
- Wash affected area with soap and water and wipe dry. Wipe panel and adhesive side of molding with a clean rag using an approved solvent .
- Apply Loctite® 414 adhesive GM P/N 12345093, or equivalent, to back of molding (1) and press in place. Apply constant pressure to molding for 30 seconds or until a firm bond has been made.
If molding has pulled loose from adhesive backing and tape remains on body panel, do not remove tape from body. Clean back of molding and tape on body with an approved solvent.
A straight edge (2) can be used as a guide to keep the molding straight. Masking tape may also be used as a guide.
