- Loosen the inner adjustment link cam nut.
- Rotate the cam bolt (2) using an 8 mm socket on the threaded end of the bolt..
- Adjust the rear toe to the required specification setting.
- Tighten the Cam nut.
- Recheck the toe setting after tightening the jam nut.
- Readjust the toe setting if necessary.
Important: Make left and right wheel rear toe adjustments separately, per wheel, using the following procedure.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the cam nut to 80 N·m (74 lb ft).
