Circuit Description
The keyboard data display (KDD) is the data bus used to communicate between the IPM and the climate control panel. The climate control panel is part the IPM and is serviced as one component. This is an internal error of the IPM.
Conditions for Setting the DTC
| • | The ignition is ON. |
| • | Internal open or short. |
Action Taken When the DTC Sets
A default valve of 27°C (70°F) will be used by the IPM to allow operation of the system.
Conditions for Clearing the MIL/DTC
| • | This DTC requires an ignition cycle in order to change from current to history. |
| • | The module no longer detects the internal error. |
| • | A history DTC will clear after 50 consecutive ignition cycles if the condition for the malfunction is no longer present. |
| • | Use a scan tool. |
| • | IPM battery voltage is interrupted. |
Diagnostic Aids
DTC B1399 is an internal module malfunction, the module may need to be replaced. Refer to diagnostic table.
Test Description
The numbers below refer to the step numbers on the diagnostic table:
-
Perform the Body Control Module Diagnostic System Check before continuing with the diagnosis of this DTC.
-
Clear all DTCs and cycle ignition to check that the DTC did not falsely set.
-
Clear all DTCs after the repair procedure is complete.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Was the Body Control Module Diagnostic System Check performed? | -- | |||
Is the DTC still present? | -- | System OK | ||
3 | Replace the instrument integration module (IPM); refer to Body Control Module Replacement . Is the module replacement complete? | -- | -- | |
Are all DTCs cleared? | -- | -- |
