GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2000 🢒 Seville 🢒 Engine 🢒 Engine Cooling 🢒 Secondary Air Injection Control Valve Replacement - Bank 2

Removal Procedure

    Object Number: 602321 Size: SH
  1. Remove the vacuum connections from the AIR check valve.
  2. Loosen and lower the pinch clamp holding the AIR exhaust hose to the front AIR check valve.

    3. Object Number: 602323 Size: SH
  3. Remove the nuts retaining the AIR check valve to the exhaust manifold pipe.
  4. Remove the front AIR check valve.

Installation Procedure

    Object Number: 602323 Size: SH
  1. Install the front AIR check valve.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts retaining the AIR check valve to the exhaust manifold pipe.

    3. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  3. Reconnect the vacuum connections.

    4. Object Number: 602321 Size: SH
  4. Install the AIR exhaust hose and pinch clamp.