These engines use a cross-flow, lightweight
aluminum and plastic radiator. The radiator consists of the following components:
• | A brazed aluminum tube and center core (1) |
• | Two plastic end tanks (4, 9) |
• | A transmission oil cooler (11) |
• | An engine oil cooler (3) |
• | A radiator drain cock (7) |
Clinch tabs fasten the end tanks to the core. A high temperature rubber
gasket (2, 12) seals each of the end tanks. The left side end tank
houses the transmission oil cooler. The right side end tank houses the engine
oil cooler. Rubber gaskets (6, 10) and nuts (5, 8) seal the
oil cooler fittings to the end tanks. The drain cock (7) is plastic
and this is at the bottom of the left side end tank.