Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Seat Belt Diagnostic System Check? | -- | Go to Step 2 | Go to Diagnostic System Check | ||||||
2 |
Does the scan tool display Buckled? | -- | Go to Step 3 | Go to Step 4 | ||||||
3 |
Does the suspect indicator illuminate during the bulb check? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 10 | ||||||
4 |
Does the scan tool display Buckled? | -- | Go to Step 8 | Go to Step 5 | ||||||
5 | Test the ground circuit of the driver seat belt switch for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 6 | ||||||
6 | Test the signal circuit of the driver seat belt switch for the following conditions:
Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 7 | ||||||
7 | Inspect for poor connections at the harness connector of the SDM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 9 | ||||||
8 | Inspect for poor connections at the harness connector of the driver seat belt switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 11 | ||||||
9 | Replace the SDM. Refer to Inflatable Restraint Sensing and Diagnostic Module Replacement in SIR. Did you complete the replacement? | -- | Go to Step 12 | -- | ||||||
10 | Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Did you complete the replacement? | -- | Go to Step 12 | -- | ||||||
11 | Replace the driver seat belt switch. Refer to Seat Belt Buckle Pretensioner Replacement - Left Side in SIR. Did you complete the replacement? | -- | Go to Step 12 | -- | ||||||
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
