Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
The symptom list in Symptoms will determine the correct diagnostic procedure to use.
-
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Step | Action | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
1 |
Does the scan tool power up? | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications | ||||||||
2 | Attempt to establish communication with the following:
Does the scan tool communicate with the Radio, IPM, CD Changer, or DIM? | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | ||||||||
3 | Select the following display DTC functions on the scan tool:
Does the scan tool display any DTCs? | Go to Step 4 | Go to Symptoms | ||||||||
4 | Does the scan tool display any DTCs which begin with a "U"? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 5 | ||||||||
5 | Does the scan tool display DTC B1004, B1007, or B1009? | Go to Diagnostic Trouble Code (DTC) List/Type in Body Control Systems | Go to Step 6 | ||||||||
6 | Does the scan tool display DTC B1327 or B1328? | Go to Diagnostic Trouble Code (DTC) List/Type in Engine Electrical |
