Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 | Disconnect the stoplamp/BTSI switch connector C1. Do the stoplamps turn off? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the stoplamp/BTSI switch. Refer to Stop Lamp Switch Replacement in Brakes. Is the stoplamp/BTSI switch replacement complete? | -- | Go to Step 5 | -- |
4 | Repair the short to battery positive voltage (B+) in CKT 17 (WHT). Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK. | Go to Step 2 |