Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Is the voltage within the specified range? | 10-15 V | Go to Step 3 | Go to Step 4 |
3 | Replace the turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column-Tilt. Is the turn signal switch replacement complete? | -- | Go to Step 8 | -- |
4 | Check the rear fuse block IGN 1 Fuse for an open. Is the IGN 1 Fuse OK? | -- | Go to Step 7 | Go to Step 5 |
5 | Repair the short to ground in CKT 1039 (PNK). Inspect all wiring that is fed by the IGN 1 Fuse. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | Go to Step 6 | -- |
6 | Replace the IGN 1 Fuse. Is the IGN 1 Fuse replacement complete? | -- | Go to Step 8 | -- |
7 | Repair the open in CKT 1039 (PNK) between the rear fuse block and the turn signal switch. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK. | Go to Step 2 |