Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Is the resistance less than the specified value? | 5 ohms | Go to Step 3 | Go to Step 6 |
3 | Connect a DMM from the RFDM connector C1 cavity 20 (YEL) to the RH front power window switch connector cavity 5 (YEL/BLK). Is the resistance less than the specified value? | 5 ohms | Go to Step 4 | Go to Step 7 |
4 | Connect a DMM from the RFDM connector C1 cavity 10 (BLK/WHT) to the RH front power window switch connector cavity 4 (BLK/WHT). Is the resistance less than the specified value? | 5 ohms | Go to Step 5 | Go to Step 8 |
5 | Replace the RH front door module (RFDM). Refer to Door Control Module Replacement in Doors. Is the RFDM replacement complete? | -- | -- | |
6 | Repair the short to ground in CKT 1491 (YEL) or (YEL/BLK). Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
7 | Repair the open in CKT 1491 (YEL) or (YEL/BLK) between the RFDM and S600. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
8 | Repair the open in CKT 351 (BLK/WHT) between the RFDM and S601. Refer to Wiring Repairs in Wiring Systems. Is the circuit repair complete? | -- | -- | |
9 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK. |
