Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Radio/Audio System Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the CD player play without noise? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Is noise present only on one channel? | -- | Go to Step 4 | Go to Step 5 |
4 | Test the output circuit of the suspect channel for a short, high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 8 |
5 | Test the shield ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 6 |
6 | Test the common output circuit for a short, high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 7 |
7 | Inspect the audio harness shield for damage. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 8 |
8 |
Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 9 |
9 |
Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 10 |
10 | Replace the CD player. Refer to Remote CD Changer Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
