Step | Action | Yes | No |
|---|---|---|---|
SCHEMATIC REFERENCE: Cigar Lighter/Power Outlet Schematics | |||
1 | Did you perform the Cigar Lighter/Auxiliary Outlets Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Cigar Lighter/Auxiliary Outlets |
2 | Operate the front cigar lighter. Does the cigar lighter operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Inspect the C/LTR fuse for an open. Is the fuse open? | Go to Step 15 | Go to Step 4 |
4 |
Does the test lamp illuminate? | Go to Step 9 | Go to Step 5 |
5 | Inspect the CIGAR fuse in the Rear Fuse Block for an open. Is the fuse open? | Go to Step 16 | Go to Step 6 |
6 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 17 |
7 | Connect a test lamp between control circuit of the cigar relay and the coil feed circuit of the cigar relay. Does the test lamp illuminate? | Go to Step 8 | Go to Step 11 |
8 | Connect a test lamp between battery positive voltage circuit of the cigar relay and a good ground. Does the test lamp illuminate? | Go to Step 12 | Go to Step 18 |
9 |
Does the test lamp illuminate? | Go to Step 13 | Go to Step 10 |
10 | Connect a test lamp between the supply voltage circuit of the front cigar lighter and a good ground. Does the test lamp illuminate? | Go to Step 19 | Go to Step 20 |
11 | Test the control circuit of the cigar relay for an open or short to battery voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | Go to Step 14 |
12 | Inspect for a poor connection / terminal tension at the cigar relay. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | Go to Step 21 |
13 | Inspect for a poor connection/terminal tension at the front cigar lighter. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | Go to Step 22 |
14 | Inspect for a poor connection/terminal tension at the Rear Integration Module (RIM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | Go to Step 23 |
15 | Repair the short to ground in the supply voltage circuit of the cigar lighter. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 24 | -- |
16 | Repair the short to ground in the supply voltage circuit of the C/LTR fuse. Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | -- |
17 | Repair the open or high resistance in the coil feed circuit of the cigar relay. Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | -- |
18 | Repair the open or high resistance in the battery positive voltage circuit of the cigar relay. Refer to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 24 | -- |
19 | Repair the open or high resistance in the ground circuit of the front cigar lighter. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 24 | -- |
20 | Repair the open or high resistance in the supply voltage circuit of the front cigar lighter. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 24 | -- |
21 | Replace the cigar relay. Did you complete the replacement? | Go to Step 24 | -- |
22 | Replace the front cigar lighter. Refer to Cigar Lighter Housing Replacement in Instrument Panel, Gauges, and Console. Did you complete the replacement? | Go to Step 24 | -- |
23 | Replace the Rear Integration Module (RIM). Refer to Rear Integration Body Control Module Replacement in Body Control Systems. Did you complete the replacement? | Go to Step 24 | -- |
24 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
