Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Open the drive window.
- Take the key out of the ignition.
- Close all of the doors.
- Use the RFA key fob in order to lock all of the doors.
- Wait 45 seconds.
| The SECURITY light turns off.
|
Content Theft Deterrent (CTD) Alarm Mode Inoperative
|
2
|
- Unlock the door using the left front power door unlock switch.
- Open the any door.
| The following components activate about once
per second:
|
|
3
| Use the RFA key fob in order
to unlock the door.
| The system deactivates.
|
Content Theft Deterrent (CTD) Alarm Mode Inoperative
SECURITY Indicator Always On or Flashing
|
4
|
- Close all doors.
- Use the RFA key fob in order to lock the doors.
- Wait 45 seconds.
- Turn the ignition switch to the RUN position.
| The system enters
the stand-by mode.
|
|
5
|
- Remove the key from the ignition.
- Close all doors
- Use the RFA key fob in order to lock the doors.
- Wait 45 seconds.
- Use the left door lock cylinder switch in order to unlock the
door.
- Open the door.
| The system enters the stand-by mode.
|
Content Theft Deterrent (CTD) Alarm Mode Inoperative
|
6
|
- Open the right front window.
- Remove the key from the ignition.
- Close all of the doors.
- Use the RFA key fob in order to lock the doors.
- Wait 45 seconds.
- Use the right front power door unlock switch in order to unlock
the door.
- Open the door.
| The following components activate about once
per second:
|
|
7
|
- Open the right front window.
- Remove the key from the ignition.
- Close all of the doors.
- Use the RFA key fob in order to lock the doors.
- Wait 45 seconds.
- Use the key to enter the trunk
- Open the trunk.
| The system enters the stand-by mode.
|
Content Theft Deterrent (CTD) Alarm Mode Inoperative
|
* Refer to the appropriate symptom diagnostic table for
the applicable abnormal result.
|