GM Service Manual Online
For 1990-2009 cars only

Front-to-Rear, Side-to-Side, and Up/Down Adjustments


    Object Number: 105326  Size: SH
  1. Loosen the retainer bolts (3) retaining the rear compartment lid to the rear compartment hinges.
  2. Align the rear compartment lid (1).
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Tighten the bolts (3).
  5. Tighten
    Tighten the retainer bolts to 25 N·m (18 lb ft).

  6. If necessary, complete front-to-rear and side-to-side lid adjustment at the hinge-to-rear shelf panel bolts. Refer to Rear Compartment Lid Hinge Replacement .