GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Alero Export 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Rocker Panel Molding Replacement

Removal Procedure

    Object Number: 329472 Size: SH
  1. Remove the rocker panel molding screws (2).
  2. In order to remove the rocker panel molding (1) complete the following steps:
    3. 2.1. Push upward on the rocker panel molding (1).
    2.2. Disengage the rocker panel molding (1) from the retainers.
  3. Remove the rocker panel molding retaining clips.

Installation Procedure

    Object Number: 329472 Size: SH
  1. Install the rocker panel molding retaining clips.
  2. Snap the rocker panel molding (1) over the retainers.
  3. Install the rocker panel molding retaining screws (2). Tighten the screws (2) until the screws are fully driven, seated and not stripped.