The rear compartment lid lock striker (1) is retained by a stud and nut (2).

1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .



2. Remove the rear compartment lid lock striker nuts (2).



3. Remove the rear compartment lid lock striker (1).

1. Install the rear compartment lid lock striker (1).



2. Install the rear compartment lid lock striker nuts (2).
3. Hand tighten the rear compartment lid lock striker nuts.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Verify that the rear compartment lid lock striker and the rear compartment lid lock are properly aligned.

Tighten
Tighten the nut to 7 N·m (62 lb in).

5. Install the rear bumper. Refer to Rear Bumper Fascia Replacement .