Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | RH side of the IP, near the fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Clutch Pedal Position (CPP) Switch | On the Clutch support bracket | Engine Electrical Component Views in Engine Electrical | Engine Electrical Connector End Views in Engine Electrical |
Front Axle Switch | At the front axle, to the right of the differential | -- | Transfer Case Control Connector End Views in Transfer case |
Instrument Cluster | On the upper right end of the IP, above the steering column | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges, and Console |
IP Fuse Block | To the right of the IP, near the right front door jamb switch | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Transfer Case Control Module (TCCM) | LH lower kick panel below the IP | Transfer Case Control Component Views in Transfer Case | -- |
Transfer Case Control Module (TCCM) Connector C1 (32 cavities) | LH lower kick panel below the IP | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Control Module (TCCM) Connector C2 (32 cavities) | LH lower kick panel below the IP | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Shift Solenoid | In the LH rear of the engine compartment, near the cowl | -- | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Select Switch | At the center of the IP, above the right of the radio | -- | -- |
Transfer Case Select Switch Connector C1(8 cavities) | At the center of the IP, above the right of the radio | -- | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Select Switch Connector C2(4 cavities) | At the center of the IP, above the right of the radio | -- | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Encoder Motor | RH of the ATC, below the rear transfer case speed sensor | Transfer Case Control Component Views in Transfer Case | -- |
Transfer Case Encoder Motor Connector C1 (4 cavities) | RH of the ATC, below the rear transfer case speed sensor | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Encoder Motor Connector C2 (6 cavities) | RH of the ATC, below the rear transfer case speed sensor | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Speed Sensor, Front | On the left side of the transfer case | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Speed Sensor, Rear | On the right rear of the transfer case, near the drive shaft | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Underhood Fuse Block | On the top of the right inner wheelwell, near the battery | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 cavities) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 cavities) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) | On the left side of the engine compartment | Engine Controls Component Views in Engine Controls | |
Vehicle Control Module (VCM) Connector C4 (24 cavities) | On the left side of the engine compartment | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
C101 (8 cavities) | At the engine harness to body harness, to the right of the engine compartment, near the VCM | -- | Inline Harness Connector End Views in Wiring Systems |
C103 (16 cavities) | At the engine harness to the body harness, near the VCM | -- | Inline Harness Connector End Views in Wiring Systems |
C114 (2 cavities) | At the body harness to the front axle switch extension harness, to the left center of the engine compartment, near the EBCM | -- | Inline Harness Connector End Views in Wiring Systems |
C203 (116 cavities) | At the body harness to IP harness, to the left of the IP | -- | Inline Harness Connector End Views in Wiring Systems |
G103 | (CKT 351) At the engine harness, to the left rear of the cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G104 | (CKT 450) At the engine harness, to the right rear of the cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G105 | (CKT 451) At the engine harness, to the right rear of the cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G203 | (CKT 1850) At the body harness, to the right of the IP | -- | -- |
G204 | (CKT 1850) At the body harness, to the right of the IP | -- | -- |
P100 | In the right rear side of the engine compartment, at the bulkhead, above C100 | -- | -- |
S106 | (CKT 351) At the engine harness, between the breakouts to the VCM connectors and the engine coolant temperature sensor connector, 27 cm (10.8 in) from the breakout for the VCM connnectors | -- | -- |
S115 | (CKT 1640) In the body harness at the breakout to the park lamp switch relay connector | -- | -- |
S116 | (CKT 431) In the body harness, 19.5 cm (7.8 in) from the breakout to the windshield wiper motor connector, toward the underhood fuse block | -- | -- |
S125 | (CKT 1695) In the body harness between the breakouts for the EBCM C1 and the cruise control module connector, 6.5 cm (2.6 in) from the EBCM CI breakout | -- | -- |
S140 | (CKT 450, CKT 514) In the engine harness between the breakouts to the RH rear VSS connector and the transfer case encoder motor connectors, 10 cm (4 in) from the transfer case connector breakout | -- | -- |
S152 | (CKT 351, CKT 451) At the engine harness between the breakouts for the left rear and right rear engine block grounds, 15 cm (5.9 in) from the breakout to the right rear engine block ground | Power and Grounding Component Views in Wiring Systems | -- |
S200 | (CKT 584) At the body harness between the breakouts to the automatic transmission indicator lamp connector and the rear washer hose, 10 cm (4 in) from the washer hose breakout | -- | -- |
S201 | (CKT 1807) In the body harness 13 cm (5.2 in) from the BCM connnector breakout, toward the C211 steering column harness connector | -- | -- |
S203 | (CKT 241) In the body harness 39 cm (15.6 in) from the BCM connector breakout, toward the C211 steering column harness connector | -- | -- |
S211 | (CKT 1050) In the body harness 6.5 cm (2.6 in) from the G203, G204, and G205 grounds breakout and the ground terminals | -- | -- |
Splice Pack SP203 | (CKT 1850) IP harness, on the IP, in front of the ashtray | Harness Routing Views in Wirng Systems | -- |
