Was the Hydraulic Brake System Diagnostic Check performed?

-

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check .

Inspect the disc brake pads and brake shoe linings for the following: excessive wear.

Do any of the above conditions apply?

-

Go to Step 3

Go to Step 4

Replace the brake linings. Refer to Brake Pad Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

-

Inspect the brake rotors for the following: heat spotting or scoring.

Refer to Brake Rotor Inspection in Disc Brakes.

Do any of the above conditions apply?

-

Go to Step 5

Go to Step 6

1. Refinish the rotor. Refer to Refinishing Brake Rotors in Disc Brakes.
2. If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Brake Rotor Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

-

Inspect brake assembly for loose, broken or missing attachments. Refer to Brake Pad Inspection in Disc Brakes.

Are there any loose, broken or missing attachments?

-

Go to Step 7

System OK

Tighten or replace the loose, broken or missing brake assembly components.

Is the repair complete?

-

Go to Step 8

-

Verify proper brake system operation.

Does the original condition still exist?

-

Begin the diagnosis again. Go to Step 1

System OK