Was the Hydraulic Brake System Diagnostic Check performed?

-

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check .

Inspect the disc brake pads and brake shoe linings for the following:

Refer to Brake Pad Inspection in Disc Brakes.

Do any of the above conditions apply?

-

Go to Step 3

Go to Step 4

Replace the brake linings. Refer to Brake Pad Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

-

Inspect the brake rotors for the following

Refer to Brake Rotor Inspection in Disc Brakes.

Do any of the above conditions apply?

-

Go to Step 5

Go to Step 6

1. Refinish the brake rotor. Refer to Refinishing Brake Rotors in Disc Brakes.
2. If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Brake Rotor Replacement in Disc Brakes.

Is the repair complete?

Refer to Component Specifications is Disc Brakes.

Go to Step 8

-

Inspect brake assembly for loose, broken, or missing components. Refer to Brake Pad Inspection in Disc Brakes.

Are there any loose, broken, or missing brake assembly components?

-

Go to Step 7

System OK

Tighten or replace the loose, broken or missing brake assembly components. Refer to Brake Pad Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

-

Verify proper brake system operation.

Does the original condition still exist?

-

Verify the customer complaint. Begin the diagnosis again. Go to Step 1.

System OK