Was the Hydraulic Brake System Diagnostic Check performed?

-

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check .

Inspect the front suspension for loose or missing components.

Are there any loose or missing components?

-

Go to Step 3

Go to Step 4

Tighten, repair or replace missing the components as necessary. Refer to Fastener Tightening Specifications in Front Suspension.

Is the repair complete?

-

Go to Step 8

-

Inspect the disc brake pads and brake shoe linings for the following:

Do any of the above conditions apply?

-

Go to Step 5

Go to Step 6

Replace the brake linings. Refer to Disc Brake Pads Replacement in Disc Brakes.

Is the repair complete?

-

Go to Step 8

-

Check the wheel assemblies for out of balance condition.

Are any of the wheel assemblies out of balance?

-

Go to Step 7

System OK

Balance the wheel assembly. Refer to Balancing Tire and Wheels in Vibration Diagnosis and Correction.

Is the repair complete?

-

Go to Step 8

-

Verify proper brake system operation.

Does the original condition still exist?

-

Verify customer complaint. Begin the diagnosis again. Go to Step 1.

System OK