For 1990-2009 cars only
Removal Procedure
- Remove the master cylinder rod from the clutch pedal.
- Turn the master cylinder 45° counterclockwise to unlock the master cylinder.
- Disconnect the wiring harness from the clutch master cylinder start switch.
- Remove the clutch master cylinder from the dash panel.
- Using J 42371, remove the clutch line from the concentric slave cylinder.
- Remove the clip securing the clutch line to the heat shield.
Installation Procedure
- Install the clip securing the clutch line to the heat shield.
- Pull back on the connector sleeve and connect the clutch line to the concentric slave cylinder.
- Position the clutch master cylinder into the cowl panel hole.
- Turn the master cylinder 45° counter clockwise to lock the master cylinder.
- Connect the master cylinder rod to the clutch pedal.
