- Slide the turn signal
and multifunction switch assembly (1) into the signal switch housing
assembly so that the locking tabs snap into place.
Caution: Improper routing of the wire harness assembly may damage the inflatable
restraint steering wheel module coil. This may result in a malfunction of
the coil, which may cause personal injury.
- Connect the connectors to the IR wiper and switch assembly (1).
- Install the upper and lower trim covers. Refer to
Steering Column Trim Covers - Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.