Was the Headlight System Check performed?

--

Go to Step 2

Go to Headlight System Check

1. Connect a scan tool to the vehicle.
2. Perform the Body Control Module (BCM) Diagnostic System Check. Refer to Diagnostic System Check - Body Control System in Body Control System. Return to this step if the system check reports system normal.
3. Select Body Control Module.
4. Read the ambient light status.

Does the ambient light display show the specified value?

DARK

Go to Step 3

Go to Step 6

1. Select Body Control Module.
2. Read the auto headlamps enabled status.
3. Ensure that the park brake is not applied.
4. Turn the ignition switch to the RUN position.

Does the auto headlamps enabled display show the specified value?

YES

Go to Step 4

Go to Step 5

Locate and repair the open in CKT 352 (WHT) between the BCM and the underhood fuse block.

Is the repair complete?

--

Go to Headlight System Check

--

Replace the BCM. Refer to Body Control Module Replacement in Body Control System.

Is the repair complete?

--

Go to Headlight System Check

--

1. Cover the ambient light sensor. Ensure that no light reaches the sensor.
2. Select Body Control Module.
3. Read the ambient light status.

Does the ambient light display show the specified value?

DARK

Go to Step 8

Go to Step 7

Replace the ambient light sensor.

Is the repair complete?

--

Go to Headlight System Check

--

Did the headlamps illuminate?

--

Go to Headlight System Check

Go to Step 3