Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | To the right of the IP, near the IP Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Data Link Connector (DLC) | To the lower right of the IP | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Engine Oil Pressure Gauge Sensor | Top rear of the engine, below the distributor | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Hazard Switch | Center of the IP, next to the radio | -- | Lighting Systems Connector End Views in Lighting Systems |
Instrument Cluster | In the IP, ahead of the steering column | -- | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
Inflatable Restraint Sensing and Diagnostic Module (SDM) | Between the front seats below the console | SIR Component Views in SIR | SIR Connector End Views in SIR |
IP Fuse Block | To the right of the IP, near the right front door jamb switch | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block | On the top of the right inner wheelwell near the battery | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) | To the left of the engine compartment | Engine Controls Component Views in Engine Controls | -- |
Vehicle Control Module (VCM) Connector C2 (32 Cavities) | To the left of the engine compartment | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
Vehicle Control Module (VCM) Connector C4 (24 Cavities) | To the left of the engine compartment | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
C101 (8 Cavities) | The engine harness to the body harness, to the left of the engine compartment, near the VCM | -- | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | The body harness to the IP harness, to the left of the IP | -- | Inline Harness Connector End Views in Wiring Systems |
G105 | (CKT 451) At the engine harness, to the right rear of the cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G203 | (CKT 1850) At the body harness, to the right front of the IP | -- | -- |
G204 | (CKT 1850) At the body harness, to the right front of the IP | -- | -- |
P100 | At the IP bulkhead pass-through, to the right rear of the engine compartment, on the cowl | -- | -- |
S152 | (CKT 351, CKT 451) At the engine harness, between the breakouts for the left rear and the right rear engine block grounds, 15 cm (5.9 in) from the breakout to the right rear engine grounds | Power and Grounding Component Views in Wiring Systems | -- |
S205 | (CKT 1220) At the IP harness, between the breakouts for the instrument cluster connector and BCM connector C3, 6.5 cm (2.6 in) from the breakout to the BCM connector | -- | -- |
S211 | (CKT 1850) At the body harness, 6.5 cm (2.6 in) from G203, G204, and G205 ground breakout and the ground terminals | -- | -- |
S218 | (CKT 451) At the body harness, 10.5 cm (4.2 in) from the BCM connector breakout toward C203 | -- | -- |
S224 | (CKT 451) At the IP harness, between the breakouts for the BCM C3 and the radio connector, 19.5 cm (7.8 in) from the BCM C3 breakout | -- | -- |
S225 | (CKT 1414) At the IP harness, between the breakouts for the BCM C3 and the radio connector, 13 cm (5.2 in) from the BCM C3 breakout | -- | -- |
S226 | (CKT 1415) At the IP harness, between the breakouts for the BCM C3 and the radio connector, 6.5 cm (2.6 in) from the BCM C3 breakout | -- | -- |
S287 | (CKT 340) At the IP harness, between the breakouts for the BCM C3 and the radio connector, 9 cm (3.6 in) from the radio connector breakout | -- | -- |
Splice Pack SP203 | In the IP harness on the IP, behind the ashtray | Harness Routing Views in Wiring Systems | -- |
