Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Cruise Control System Check performed? | -- | Go to Step 2 | |
2 |
Does the lamp remain lit? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp light? | -- | Go to Step 9 | Go to Step 7 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
5 | Locate and repair the short to the voltage between the stoplamp switch and the cruise control module. Is the repair complete? | -- | -- | |
6 | Adjust or replace the stoplamp switch. Is the repair complete? | -- | -- | |
7 | Does the CHMSL operate properly? | -- | Go to Step 8 | |
8 | Locate and repair the open circuit or high resistance in CKT 1320 (LT BLU) between the cruise control module connector G and underhood fuse block connector C1 terminal F11. Is the repair complete? | -- | -- | |
9 | Inspect the terminals for proper contact. Are the contacts clean? | -- | Go to Step 11 | Go to Step 10 |
10 | Clean the contacts as necessary. Is the repair complete? | -- | -- | |
11 | Replace the cruise control module Cruise Control Module Replacement . Is the repair complete? | -- | -- |
