GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Blazer - 4WD - RHD 🢒 Body and Accessories 🢒 Doors 🢒 Power Window Inoperative - Left Side Rear

Step

Action

Value(s)

Yes

No

1

Was the Power Windows System Check performed?

--

Go to Step 2

Refer to Power Windows System Check

2
  1. Access the RH front door lock and side window switch.
  2. Turn the ignition switch to the RUN position.
  3. Connect a J 39200 (DMM) to CKT 168 (DK GRN), terminal G at the RH front door lock and side window switch connector C2 and CKT 169 (PPL), terminal K at the RH front door lock and side window switch connector C1.
  4. Operate the LH rear window at the RH front door lock and side window switch in the UP/DOWN position.
  5. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 6

Go to Step 3

3

Inspect for a poor connection at the RH front door lock and side window switch.

Is the connection OK?

--

Go to Step 5

Go to Step 4

4

Repair the connection as necessary.

Is the repair complete?

--

Refer to Power Windows System Check

--

5

Replace the RH front door lock and side window switch.

Is the repair complete?

--

Refer to Power Windows System Check

--

6
  1. Access the LH rear side window switch.
  2. Turn the ignition switch to the RUN position.
  3. Connect a J 39200 DMM to CKT 168 (DK GRN), terminal A at the LH rear side window switch connector and ground.
  4. Ensure that the LH rear side window switch connector remains connected.
  5. Operate the LH rear side window at the RH front door lock and side window switch in the UP position.
  6. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 8

Go to Step 7

7

Locate and repair the open or high resistance in CKT 168 (DK GRN) between the LH rear side window switch connector, terminal A and the RH front door lock and side window switch connector C2, terminal G.

Is the repair complete?

--

Refer to Power Windows System Check

--

8
  1. Connect a J 39200 DMM to CKT 169 (PPL), terminal D at the LH rear side window switch connector and ground.
  2. Ensure that the LH rear side window switch connector remains connected.
  3. Operate the LH rear side window at the RH front door lock and side window switch in the DOWN position.
  4. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 10

Go to Step 9

9

Locate and repair the open or high resistance in CKT 169 (PPL) between the LH rear side window switch connector, terminal D and the RH door lock and side window switch connector C1, terminal K.

Is the repair complete?

--

Refer to Power Windows System Check

--

10
  1. Connect a J 39200 DMM to CKT 668 (DK BLU), terminal C and CKT 669 (BRN), terminal F at the LH rear side window switch connector.
  2. Operate the LH rear window at the RH front door lock and side window switch in the UP/DOWN position.
  3. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 14

Go to Step 11

11

Inspect for a poor connection at the LH rear side window switch.

Is the connection OK?

--

Go to Step 13

Go to Step 12

12

Repair the connection as necessary.

Is the repair complete?

--

Refer to Power Windows System Check

--

13

Replace the LH rear side window switch.

Is the repair complete?

--

Refer to Power Windows System Check

--

14
  1. Turn the ignition switch to the RUN position.
  2. Place the side window lockout switch in the NORMAL (UNLOCKED) position.
  3. Connect a J 39200 DMM to CKT 1307 (DK BLU), terminal B at the LH rear side window switch connector and ground.
  4. Ensure that the LH rear side window switch connector remains connected.
  5. Test for voltage.

Is Ignition voltage present?

IGN+

Go to Step 16

Go to Step 15

15

Locate and repair the open or high resistance between CKT 1307 (DK BLU) at S306 and terminal B at the LH rear side window switch connector.

Is the repair complete?

--

Refer to Power Windows System Check

--

16
  1. Connect a J 39200 DMM to CKT 668 (DK BLU), terminal B at the LH rear side window regulator motor connector and CKT 669 (BRN), terminal F at the LH rear side window switch connector.
  2. Operate the LH side window switch in the UP position.
  3. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 18

Go to Step 17

17

Locate and repair the open or high resistance at CKT 668 (DK BLU) between terminal B at the LH rear side window regulator motor connector and terminal C at the LH rear side window switch connector.

Is the repair complete?

--

Refer to Power Windows System Check

--

18
  1. Connect a J 39200 DMM to CKT 668 (DK BLU), terminal B and CKT 669 (BRN), terminal A at the LH rear side window regulator motor connector.
  2. Operate the LH rear side window switch in the DOWN position.
  3. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 20

Go to Step 19

19

Locate and repair the open or high resistance at CKT 669 (BRN) between terminal A at the LH rear side window regulator motor connector and terminal F at the LH rear side window switch connector.

Is the repair complete?

--

Refer to Power Windows System Check

--

20

Inspect for a poor connection at the LH rear side window regulator motor.

Is the connection OK?

--

Go to Step 22

Go to Step 21

21

Repair the connection as necessary.

Is the repair complete?

--

Refer to Power Windows System Check

--

22

Replace the LH rear side window regulator motor.

Is the repair complete?

--

Refer to Power Windows System Check

--