GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the Power Windows System Check performed?

--

Go to Step 2

Refer to Power Windows System Check

2

  1. Access the RH door lock and side window switch.
  2. Turn the ignition switch to the RUN position.
  3. Connect a J 39200 (DMM) to CKT 166 (LT BLU), terminal A at the RH door lock and side window switch connector C2 and CKT 167 (TAN), terminal E at the RH door lock and side window switch connector C2.
  4. Operate the LH front window at the RH door lock and side window switch in the UP/DOWN position.
  5. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 3

Go to Step 5

3

Inspect for a poor connection at the RH door lock and side window switch.

Are the connections OK?

--

Go to Step 5

Go to Step 4

4

Repair the connections as necessary.

Is the repair complete?

--

Refer to Power Windows System Check

--

5

Replace the RH door lock and side window switch.

Is the repair complete?

--

Refer to Power Windows System Check

--