GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Blazer - 4WD - RHD 🢒 Body and Accessories 🢒 Seats 🢒 Seat Back Cover and Pad Replacement

Removal Procedure
  1. Remove the armrests. Refer to Rear Side Door Trim Panel Replacement in Doors.
  2. Disconnect the 2 hook-and-loop fasteners at the bottom corners of the seat back.
  3. Remove the trim cover and pad assembly from the seat back frame.

    4. Important: Note the locations of the hog rings. This will assist with reassembly.

  4. Remove the hog rings retaining the trim cover to the pad.
  5. Remove the trim cover from the pad.

Installation Procedure
  1. Install the trim cover to the pad.
  2. Install the hog rings retaining the trim cover to the pad in the locations noted during disassembly.
  3. Install the trim cover and pad assembly to the seat back frame.
  4. Connect the 2 hook and loop fasteners at the bottom corner of the seat back.
  5. Install the armrests. Refer to Rear Side Door Trim Panel Replacement in Doors.